Home » Plumbing Services
Spokane Valley Plumbing Company handles residential and commercial plumbing work across Spokane Valley and the surrounding Spokane County area. Whether you need a leaking pipe repaired, a water heater replaced, a clogged drain cleared, or a full repipe scheduled, call and a real person will scope the job and get it on the calendar. No pressure and no gimmicks, just sound, lasting plumbing. Real experience. Local knowledge. Ready to plumb.
Your home deserves pipes that are sound and up to code, and so does every commercial property you own or manage. We work with homeowners, landlords, property managers, and businesses throughout Spokane Valley. That includes single-family homes, rental properties, multi-family buildings, offices, restaurants, and retail spaces.
The scope of work is broad. Fixture installation, leak detection and repair, drain cleaning, water heater service, sewer line work, and repiping are all part of what we handle day to day. If a plumbing problem comes up at your property, we want to hear about it. Calls are answered any hour, any day, so you are never waiting until Monday morning to get a problem looked at. Give us a call and we will take it from there.
Doing plumbing work right matters, and we'll help you get it right, whether the job is a slow kitchen drain or a water line that has been losing pressure for weeks.
Clogged and slow drains are among the most common calls we get in Spokane Valley. A backed-up drain or a main line clog can affect one fixture or the entire building, and the cause is not always obvious from the surface. We clear the blockage and look at what caused it, so the fix addresses the problem rather than just the symptom. The cause of a leak explained, not just the patch, is how we approach every drain and leak call.
Leak detection covers everything from a dripping supply line behind a wall to a water line losing pressure underground. We locate the source before we start cutting, which keeps the repair focused and the disruption minimal. Toilet repairs, toilet replacements, faucet repairs, and fixture installations round out the everyday work. A running toilet or a dripping faucet may seem minor, but the water loss adds up fast and the underlying cause is usually straightforward to address once the fixture is properly inspected.
Garbage disposal installation and repair, water pressure diagnostics, and shutoff valve replacement are also part of the regular service mix. Low water pressure can point to a partially closed valve, a failing pressure regulator, or a supply line issue, and we work through those possibilities systematically. We're ready to get your drains running again.
A water heater that stops producing hot water, starts leaking at the base, or makes rumbling noises when heating is telling you something is wrong. We handle water heater repair and full replacement for tank units across Spokane Valley. When we arrive, we check the heating elements, the thermostat, the anode rod, and the connections before recommending a repair or replacement. If the unit can be repaired cost-effectively, we say so. If replacement makes more sense given the age and condition of the tank, we explain why and give you the price before any work is scheduled.
Tankless water heater installation involves more than swapping out a tank. The gas line or electrical supply may need to be upsized, and the venting configuration changes significantly. We scope that work on the call so you know what the installation actually involves before we show up. Tankless repair calls typically involve the flow sensor, the heat exchanger, or mineral buildup in the unit, and we diagnose those issues directly rather than replacing parts at random. Call us and we'll walk you through the repair.
From a single shutoff valve to a whole-home repipe, the water goes off first, and then we get to work. Sewer line problems range from a recurring main line clog to a collapsed or offset pipe that needs repair or replacement. We handle sewer line service for homes and commercial properties throughout Spokane County, including sewer backup repair and main line clearing. Where the line runs out to a septic tank, we work on the line itself, clearing it and repairing it as needed.
Repiping is the right call when older galvanized or corroding pipe is causing chronic leaks, discolored water, or pressure drops across the property. A whole-home repipe replaces the supply lines throughout the structure, and we plan that work so the disruption to your household or tenants is kept as short as possible. Trenchless methods are an option for certain sewer line repairs, and we assess whether that approach fits the situation when we scope the job. A straightforward choice for homeowners and property managers who want the work done without a second round of calls. Right diagnosis. Right repair. Right the first time.
Choosing the right plumbing fix is easier than it sounds when you understand what the local climate actually does to your plumbing. Spokane Valley winters bring sustained sub-freezing temperatures, hard freeze-thaw cycles, and snowmelt that puts real pressure on pipes, basements, and outdoor supply lines. Older housing stock in parts of Spokane County adds to the challenge, with pipes running through uninsulated spaces that were never designed for the cold snaps this region sees regularly. A small drip is easier to deal with than the water damage it leads to.
When a pipe freezes and then bursts, the damage can be significant in a short amount of time. Water fills wall cavities, soaks insulation, and reaches flooring and framing before the leak is even visible. We respond to burst pipe calls any hour, stop the water, and assess the full extent of the damage to the supply lines. The repair covers not just the break itself but also the conditions that allowed the pipe to freeze, so the same section does not fail again the following winter. We'll find the leak and fix it right.
Basements are common in Spokane Valley's housing stock, and spring snowmelt combined with seasonal runoff can push groundwater up against a foundation quickly. A sump pump installation puts a drain point at the lowest part of the basement floor, with a pump that moves water out before it becomes a flooding problem. We size the pump to the space, confirm the discharge line routes properly away from the foundation, and test the float switch before we leave. If you already have a sump pump that is not working reliably, we can assess whether it needs repair or replacement.
Pipe insulation and winterization is the proactive step that keeps burst pipe calls from happening in the first place. Before freeze season arrives, we can insulate exposed supply lines in crawl spaces, garages, and exterior walls, and winterize outdoor lines and frost-free hose bibs that would otherwise be vulnerable. Frost-free hose bib installation is a practical upgrade for any exterior water connection that has caused problems in past winters. The work is straightforward, the cost is predictable, and it is far less disruptive than dealing with a burst line in January.
Choosing the right plumbing fix is easier than it sounds when the pricing is clear from the start. When you call, we ask about the problem, scope the work, and give you a price before anything is scheduled. You know what the job covers and what it costs before we show up. There are no vague estimates that shift once we are on-site.
We take short-notice work and emergency plumbing calls at any hour. If a pipe bursts at midnight on a holiday weekend, we are available. If you want to schedule a water heater replacement for next week, we can do that too. The process is the same either way: call, describe the problem, get a price, and schedule when it works for you. We're ready to get your drains running again.
We serve Spokane Valley as our primary area and take calls throughout Spokane County and the surrounding communities. That includes Spokane, Liberty Lake, Millwood, Cheney, Airway Heights, Deer Park, and Medical Lake. Residential and commercial work both fall within our scope, from a single-family home in Liberty Lake to a commercial building in downtown Spokane.
If you are a property manager overseeing multiple units across the county, or a business owner dealing with a plumbing issue at your facility, we handle that kind of work regularly. Call for a quote and let us know what you are dealing with.
A water heater that produces lukewarm water, runs out of hot water faster than it used to, makes rumbling or popping noises during heating, or shows rust-colored water at the hot faucet is showing signs of wear. Leaking at the base of the tank is a more urgent sign that the unit may be near the end of its life. We assess the heating elements, thermostat, anode rod, and connections before recommending repair or replacement.
Call (509) 356-2895 and describe what you are seeing and we will tell you what the visit involves.
Discolored water at the faucet, a metallic taste, chronic low pressure, and pinhole leaks appearing in multiple locations are all signs that the supply lines in an older home may be corroding from the inside. Homes in Spokane Valley built before the 1970s commonly have galvanized steel pipe that has reached the end of its reliable service life. We assess the pipe material and condition as part of the diagnostic visit and give you a clear recommendation on whether targeted repairs or a full repipe makes more sense.
A full repipe is typically the right call when leaks are occurring in multiple locations, water pressure has dropped across the whole house, or the existing pipe material is galvanized steel that has corroded to the point where repairs are no longer holding. Patching individual leaks in a system that is failing throughout only delays the larger problem. We assess the full condition of the supply lines and explain what we find before recommending a repipe, so you understand why it is the better option in your specific case.
Hidden leaks are located using pressure testing and electronic leak detection, which allows us to identify where the line is losing pressure without opening walls or floors at random. Once the source is narrowed down, we confirm the location before making any cuts. The goal is to find the leak precisely so the repair is focused and the disruption to your home is kept as small as possible.
When water in a pipe freezes, it expands and can split the pipe wall at the weakest point. The burst usually becomes apparent when the pipe thaws and water begins flowing through the break. A repair visit covers shutting off the water supply to stop the flow, locating the failure point, thawing any remaining ice in the line, and repairing or replacing the damaged section. We also look at why that section froze so the same pipe is not at risk the following winter.
Sustained sub-freezing temperatures and hard freeze-thaw cycles put real stress on supply lines in unheated spaces, exterior walls, and underground runs that are not buried deep enough to stay below the frost line. Outdoor faucets and hose bibs are particularly vulnerable. We handle pipe insulation, frost-free hose bib installation, and winterization before freeze season to reduce that risk, and we repair burst or frozen lines when the damage has already occurred.
A sump pump installation puts a collection point at the lowest part of a basement floor, with a pump that moves water out before it can accumulate and cause flooding. Spokane Valley's spring snowmelt and seasonal runoff can push groundwater up against a foundation quickly, and a basement without a functioning sump pump is at real risk during those periods. The installation visit covers selecting the right pump for the space, setting the float and discharge line, and testing the system before we leave. If an existing pump is not keeping up, we assess whether repair or replacement is the better option.
Winterization service focuses on the supply lines most likely to freeze: those running through crawl spaces, unheated garages, exterior walls, and along the rim joist. We insulate those runs and check the connections and fittings in those areas for any existing vulnerabilities. Frost-free hose bib installation is often part of the same visit for exterior water connections that have caused problems in past winters. Getting that work done before the cold sets in costs far less than repairing a burst line mid-season.
A straightforward drain cleaning or faucet replacement usually takes under an hour. A water heater replacement, a sewer line cleaning, or a shutoff valve repair typically runs one to three hours depending on access and what the job uncovers. A full repipe is a multi-day project. We give you a realistic time estimate on the call when we scope the job, so you can plan accordingly.
The price quoted on the call is based on what you describe and what the job typically involves. If we open a wall or access a line and find damage or conditions that go beyond what was described, we stop and explain what changed before continuing. Common examples include corroded fittings that need replacement, a water heater that requires additional valve or line work, or a sewer line that has more extensive damage than the symptoms suggested. You approve any scope change before the additional work proceeds.
Clear the cabinet under any affected sink so we can reach the supply lines and drain connections without moving your belongings on the spot. If the visit involves the water heater, make sure the area around it is accessible. For main shutoff valve work, knowing where the shutoff is located and making sure it is reachable saves time at the start of the visit. We handle the rest once we are on site.
A toilet that runs continuously or cycles on and off between flushes is losing water through a faulty flapper, a worn fill valve, or a float that is set too high. Even a slow leak through the flush valve can add a significant amount to a water bill over the course of a month. The repair involves inspecting the fill valve, flapper, and float assembly, replacing the worn components, and confirming the toilet fills and stops correctly. Most running toilet repairs are completed in a single visit.
We start with the reported problem and work outward from there. For a leak call, that means checking supply lines, shutoff valves, and connections in the affected area before looking further. For a pressure issue, we check the main shutoff, the pressure regulator, and the supply lines to identify where the restriction or failure is. We explain what we find as we go so you understand what the diagnosis is before we recommend a repair.
Quick response. Clean work. Tidy finish. Spokane Valley Plumbing Company is available around the clock, every day of the year.
Whether you are dealing with an emergency or planning a repair or installation, call (509) 356-2895 for a quote.
We will scope the job, give you a price, and get it scheduled. Give us a call and we will take it from there.
We handle the full range of residential and commercial plumbing work across Spokane Valley, from a dripping faucet to a burst pipe in the middle of a January night. Every call gets a straight answer on what the job involves and what it costs before anything is scheduled. Whether you are dealing with a slow drain, a failing water heater, or a sump pump that stopped working ahead of snowmelt season, we scope the work first and start cutting second. Call for a quote and we will tell you exactly what the visit covers.
| Service Type | What It Covers | Recommended For | Helpful to Know |
|---|---|---|---|
| Toilet Repair & Installation | Running and leaking toiletsFill valve, flapper, and float repairFull toilet replacement | Any household or commercial property with a toilet that runs, leaks, or fails to flush properly | A toilet that cycles on and off between flushes can add a noticeable amount to a water bill over the course of a month. |
| Drain Cleaning & Clog Removal | Main line and fixture clogsSlow and backed-up drainsCause identified, not just cleared | Homes and commercial properties with recurring or sudden drain backups | A clog that keeps coming back usually points to a deeper line issue worth scoping before the next backup. |
| Garbage Disposal Service | Disposal installationRepair for jammed or non-starting unitsDrain connection and leak check | Kitchens with a failing or absent disposal | Most disposal repairs involve the reset switch, the grinding plate, or the drain connection, and are completed in one visit. |
| Sewer & Main Line Service | Main line clearing and backup repairSewer line repair and replacementLine service where it connects to a septic tank | Homes and commercial buildings with slow drains throughout, sewage odor, or a known main line backup | Trenchless repair is an option for certain line failures. We assess whether it fits the situation when we scope the job. |
| Water Pressure & Shutoff Valve Repair | Pressure regulator diagnosisShutoff valve repair and replacementSupply line restriction checks | Any property with pressure that has dropped across multiple fixtures or a valve that will not fully open or close | Low pressure that affects the whole house often points to the regulator or the main shutoff rather than the fixtures themselves. |
| Water Heater Repair & Replacement | Tank and tankless unitsElement, thermostat, and anode rod checksFull replacement with line and venting scope | Homeowners and property managers dealing with no hot water, leaks at the base, or aging units | If repair is cost-effective given the unit's condition, we say so. If replacement makes more sense, we explain why before any work is scheduled. |
| Leak Detection & Repair | Hidden supply line leaksPressure testing and electronic detectionWall and underground line repair | Any property with unexplained water loss, staining, or pressure drop | We locate the source before opening anything, which keeps the repair focused and limits disruption to the surrounding area. |
| Pipe Insulation & Winterization | Insulation for crawl space and exterior wall linesFrost-free hose bib installationOutdoor line winterization | Any Spokane Valley property with exposed supply lines heading into freeze season | Getting this done before the cold sets in costs far less than repairing a burst line mid-winter. |
| Faucet & Fixture Installation | Faucet repair and replacementFixture installation in kitchens and bathsShutoff valve and supply line checks | Homeowners upgrading fixtures or dealing with drips, leaks, or low flow at a specific faucet or spigot | Most faucet and fixture work is completed in a single visit once the right parts are confirmed on the call. |
| Emergency Plumbing | Burst pipe responseMajor leak shutoff and repairAround-the-clock availability including holidays | Any property with an active leak, burst pipe, or plumbing failure that cannot wait | We take emergency calls at any hour. Describe what is happening when you call and we scope the response from there. |
| Frozen & Burst Pipe Repair | Burst pipe shutoff and repairIce location and thawFreeze-point assessment to prevent repeat failure | Spokane Valley homes dealing with burst or frozen lines during or after a hard freeze | The repair covers the break and the conditions that allowed the pipe to freeze, so the same section is not at risk the following winter. |
| Sump Pump Installation | New pump sizing and installationFloat switch and discharge line setupRepair or replacement of existing pumps | Spokane Valley basements at risk from spring snowmelt and seasonal groundwater | We test the float and confirm the discharge line routes away from the foundation before the visit is complete. |
What is the difference between a tank water heater and a tankless unit, and how do I choose?
A tank water heater stores a set volume of hot water and reheats it as it cools. A tankless unit heats water on demand as it flows through, so there is no stored supply to run out of. The right choice depends on your household's peak demand, the gas line or electrical supply available, and the venting configuration in your home. Tankless installation typically requires more prep work, including upsizing the gas line or electrical circuit and changing the venting. We scope all of that on the call before we show up, so you know what the full installation involves.
What causes low water pressure throughout the house?
Pressure that has dropped across the whole house usually points to one of three things: the main shutoff valve is not fully open, the pressure regulator has failed or drifted out of range, or there is a restriction or partial blockage in the main supply line. If only one fixture has low pressure, the issue is more likely at the fixture itself, such as a clogged aerator or a failing cartridge. We work through those possibilities in order so the repair addresses the actual cause rather than the first guess.
How do I know whether a clog is at the fixture or in the main line?
A clog that affects only one sink, toilet, or tub is almost always local to that fixture or the drain branch serving it. When multiple fixtures back up at the same time, especially on the same floor or throughout the house, the problem is more likely in the main line. Gurgling sounds at one fixture when you run water at another is another sign the main line is involved. We confirm which it is before we start clearing, because the approach and the equipment differ depending on where the blockage sits.
Cause Explained on Every Call
We tell you what caused the problem, not just what we fixed. That context helps you understand the repair and catch the same issue earlier if it starts again.
What are the signs of a sewer or main line problem?
The most common signs are drains backing up in multiple locations at once, sewage odor coming from floor drains or lower-level fixtures, gurgling sounds in the drain system when water runs elsewhere in the house, and wet or sunken ground along the path of the sewer line in the yard. A single slow drain is usually a local clog. When the symptoms are spread across the house or showing up outside, the main line is the more likely cause and the right place to start the diagnosis.
Can tree roots damage a sewer line, and how is that repaired?
Tree roots are one of the more common causes of sewer line problems in older neighborhoods. Roots find their way into the line through joints, cracks, or small gaps and grow inside the pipe over time, eventually causing partial or complete blockages. Clearing the line removes the root mass, but if the pipe wall is cracked or the joint has separated, the line will need repair or replacement in that section. We assess the condition of the line after clearing it and explain what we find before recommending next steps.
What is the difference between snaking a drain and hydro jetting?
A snake, or drain auger, physically breaks through or retrieves a clog by running a cable through the line. It is effective for most common blockages. Hydro jetting uses high-pressure water to scour the inside of the pipe, clearing grease buildup, mineral scale, and debris that a snake pushes through but does not remove. Jetting is typically the better option when a line has recurring clogs caused by buildup rather than a single obstruction. We assess which approach fits the situation based on what the line is doing and how it has responded to previous clearing.
Scope Agreed Before Any Pipe Is Cut
The job is scoped and priced before we open anything. You know what the visit covers and what it costs before work begins.
When does it make sense to call a plumber rather than attempt a repair myself?
Minor tasks like replacing a showerhead, swapping an aerator, or resetting a tripped disposal are straightforward for most homeowners. The line shifts when the repair involves shutting off the main water supply, opening a wall or floor, working on the main drain line, replacing a water heater, or diagnosing a problem that is not clearly visible. A repair that goes wrong at the supply line or the main drain can cause significant water damage quickly. If you are not certain what the problem is or where it is coming from, a call to scope the job costs nothing and can save a lot of cleanup.
How are emergency plumbing calls handled after hours?
Calls are answered whenever a plumbing emergency comes up. There are no separate after-hours procedures. When you call, describe what is happening and we scope the response from there, including whether the water needs to be shut off immediately and what the visit will cover. If you are not sure where your main shutoff is located, we can walk you through finding it while you wait.
Older and Newer Plumbing Both Handled
Spokane Valley's housing stock ranges from mid-century galvanized systems to newer PEX installations, and we work on both. The approach changes with the pipe material and the age of the system.
What should I do if I suspect a water heater is leaking at the base?
Turn off the cold water supply to the heater first. The supply shutoff is typically on the cold inlet line at the top of the tank. If the unit is gas, turn the control knob to the pilot position. If it is electric, switch off the breaker for the water heater. Then call us and describe what you are seeing. A leak at the base of the tank usually means the tank itself has failed and replacement is the likely outcome, but we confirm that when we arrive rather than assuming before we see the unit.
How does a shutoff valve failure affect the rest of the plumbing?
A shutoff valve that does not fully close is a problem the moment you need to isolate a section of the system for repair. If the main shutoff will not close completely, a supply line repair anywhere in the house becomes much more complicated. Valves that have not been operated in years can seize, corrode, or fail to seal when turned. Replacing a failing shutoff valve is a straightforward repair when it is done proactively. Doing it during an emergency when water is already running is a different situation. If you know a valve in your home is stiff or has not been tested recently, it is worth having it checked.
What happens if the scope of a job changes once work has started?
If we open a wall, access a line, or remove a fixture and find conditions that go beyond what was described on the call, we stop and explain what changed before continuing. Common examples include corroded fittings that need replacement, a water heater connection that requires additional valve or line work, or a sewer line with more damage than the symptoms suggested. You approve any change in scope before the additional work proceeds. The price quoted on the call is based on what was described and what the job typically involves given that description.